Starting Steps
Starting steps are shipped with cove and shoe moulding. Single Bull nose Starting
Steps are reversible
and can be cut for shorter lengths. Standard length is 48", but longer lengths are
available.
Specifications: Tread 11/32" x 111/2". Total Rise 81/32". Riser 3/4" x 7".
Steps are reversible
and can be cut for shorter lengths. Standard length is 48", but longer lengths are
available.
Specifications: Tread 11/32" x 111/2". Total Rise 81/32". Riser 3/4" x 7".
Use 8010 and 8015 with 6010 and 6210 turnouts or volutes.
Use 8030 and 8050 with Box Newels 4075, 4091, 4092 and 4093.
Use 8040 and 8060 when placing any Post-To-Post starting newel at second riser. Use
8440, 8460, 8640 and 8660 when the starting fitting utilizes a 90° up easing. Use 8440 and
8460 with 6010P and 6210P or volutes. Use 8640 and 8660 with 6210P, 6310P and 6519P
turnouts or volutes.
This installation requires a volute with a 90° easing attached. Use a 7_3090 or a 7_3590
fitting.
8440, 8460, 8640 and 8660 when the starting fitting utilizes a 90° up easing. Use 8440 and
8460 with 6010P and 6210P or volutes. Use 8640 and 8660 with 6210P, 6310P and 6519P
turnouts or volutes.
This installation requires a volute with a 90° easing attached. Use a 7_3090 or a 7_3590
fitting.
Use 8310 and 8315 with 6210, 6310 and 6519 turnouts or standard volutes and all
climbing volutes.
climbing volutes.
8210 and 8215 should be used only with an Over-The-Post system. Any volute or turnout
may be used.
may be used.
Variable Starting Step: Allows 21/2" to be trimmed off each end to achieve
49"-54" opening.
 | |  | |  | |  | |  |